Welcome to Flightinfo.com

  • Register now and join the discussion
  • Friendliest aviation Ccmmunity on the web
  • Modern site for PC's, Phones, Tablets - no 3rd party apps required
  • Ask questions, help others, promote aviation
  • Share the passion for aviation
  • Invite everyone to Flightinfo.com and let's have fun

PA 34-200T for instruction ???

Welcome to Flightinfo.com

  • Register now and join the discussion
  • Modern secure site, no 3rd party apps required
  • Invite your friends
  • Share the passion of aviation
  • Friendliest aviation community on the web

CFINY

Well-known member
Joined
Dec 28, 2001
Posts
145
Hello,

I was wondering if Seneca II with turbo engines is OK for instruction,
or will be too expensive b/c of the turbos, and if anyone is using Seneca II T
to teach. Thanks very much.
 
A few years ago, I spent quite a few hours instructing in a Seneca II, mostly "beginning" multiengine students. It can certainly be done, our standard procedures were to make sure that power had been reduced slowly to some lower-range setting prior to any engine-out simulations. Kind of takes the surprise away, but, a wiley instructor can still come up with realistic scenarios. A full-power V1-cut type of drill has got to be pretty harsh on the turbos, I seem to recall that maybe one of those per student during training was deemed appropriate. I don't remember any particular increase in maintenance issues, but, at the same time, was very glad those weren't my TSIO-360's!
So, turbo- anything is not particularly ideal for training, especially for multi- practice where engine-out is the whole point, but, it can be done. I sure wouldn't go out and buy a II for the express purpose of multi- instruction, but, if that's what you have, it can be done.
 

Latest resources

Back
Top